Wellink Corporation NEOBIT1014VA ユーザーズマニュアル

5.  Click the Admin tab, and then click 

 in the 

task bar. 

6. Click 

 to save your changes to permanent 

memory. 

To modify a PPP interface, display the PPP Configuration page and 
click 

 in the Action(s) column for the interface you want to modify. 

The PPP Interface – Modify page displays, as shown in Figure 49. 

 

 

You can change only the status of the PPP connection, the security 
protocol, your login name, and your password. To modify the other 
settings, you must delete the interface and create a new one. 

To delete a PPP interface, display the PPP Configuration page and 
click 

 in the Action(s) column for the interface you want to delete. 

You should not delete a PPP interface unless you have received 
instructions to do so from your ISP. Without an appropriately 
defined PPP interface, you will not be able to connect to your ISP. 
You can recreate the PPP interface with the same name at a later 
time.  

After modifying or deleting a PPP interface, click 

. Then, 

Click the Admin tab, click 

 in the task bar, and 

click 

 to save your changes to permanent memory.