Wellink Corporation NEOBIT1014VA ユーザーズマニュアル

ページ / 171
NEOBIT 1014VA ADSL Router User’s Guide 
Chapter14 
Viewing Your EOA Setup 
To view your current EOA configuration, log into Configuration 
Manager, click 
Advanced
 in the task bar, and then click 
EOA
. Figure 
50 shows the EOA Configuration page. 
 
Figure 50. EOA Configuration Page 
 
The EOA table contains a row for each EOA interface currently 
defined on the device. The table may contain no entries if your ISP 
does not use the EOA protocol. 
The following table describes the fields on this page: 
Field 
Description 
Interface 
The name the software uses to identify the EOA 
interface. 
IPF Type 
The type of IP Firewall protections in effect on the 
interface (public, private, or DMZ): 
o
public interface connects to the Internet (IPoA 
interfaces are typically public). Packets received 
on a public interface are subject to the most 
restrictive set of firewall protections defined in the 
software. 
o
private interface connects to your LAN, such 
as the Ethernet interface. Packets received on a 
private interface are subject to a less restrictive 
set of protections, because they originate within 
the network. 
o
The term DMZ (de-militarized zone), in Internet 
networking terms, refers to computers that are 
available for both public and in-network accesses 
(such as a company's public Web server). 
Packets incoming on a DMZ interface—whether 
from a LAN or external source—are subject to a 
level of protection that is in between those for 
public and private interfaces. 
Lower interface 
EOA interfaces are defined in software, and then 
associated with lower-level software and hardware 
structures (at the lowest level, they are associated 
with a physical port —the WAN port). This field should 
reflect an interface name defined in the next lower 
level of software over which the EOA interface will 
operate. This will be an ATM VCC interface, such as 
aal5-0, as described in Chapter 12.