Netgear 06200051 ユーザーズマニュアル

2-8

3. Click Initiate Ad Hoc. The Ad Hoc Setting dialog box opens:

4. In the Start Ad Hoc field, choose the wireless standard (802.11a, 802.11b, or 802.11g) for your 

Ad Hoc computer-to-computer network.

5. In the Channel field, Automatic should work. 

6. Click OK.

The Wireless USB 2.0 Adapter automatically selects the highest connection speed.

Many networks use wireless security to encrypt wireless data communications. If you try to 
connect to a network with wireless security the Smart Wizard detects it. Before you can use that 
network you must set up the Wireless USB 2.0 Adapter with the same SSID, wireless security, and 
security settings as that network. If you do not know what these are, contact the person who set up 
the network.

The Wireless USB 2.0 Adapter supports the following types of wireless security:

•

Wi-Fi Protected Access 2 Pre-Shared Key (WPA2-PSK)

•

Wi-Fi Protected Access Pre-Shared Key (WPA-PSK)

•

Wired Equivalent Privacy (WEP)

For more information about wireless security, see the Web link to 

, or the wireless reference document at:

Note: If there is interference from another nearby wireless device, use the Networks 

tab page to see which channels are in use in your area. Then use a different 
channel. For example, if your neighbors use channel 6 and the signal strength 
is strong, then channels 4-8 would probably be poor choices for you.