Netgear 06200051 ユーザーズマニュアル

2-10

Print this form, fill in the configuration parameters and put it in a safe place for possible future 
reference. For an existing wireless network, the person who set up the network will have this 
information.

•

Network Name (SSID): The Service Set Identification (SSID) identifies the wireless local 
area network. Any

 

is the default WN121T wireless network name 

(SSID). You may customize it using up to 32 alphanumeric characters. Write your customized 
wireless network name (SSID) on the line below. 

Wireless network name (SSID): ______________________________ 

•

If WEP Authentication is Used. 

–

WEP Encryption key size. Identify one: 64-bit or 128-bit. The encryption key size must 
the wireless network settings.

–

Data Encryption (WEP) Keys. There are two methods for creating WEP data encryption 
keys. Whichever method you use, record the key values in the spaces below.

•

Passphrase method. ______________________________ These characters are case 
sensitive. Enter a word or group of printable characters and click the Generate Keys 
button. Not all wireless devices support the passphrase method.

•

Manual method. These values are not case sensitive. For 64-bit WEP, enter 10 hex 
digits (any combination of 0-9 or a-f). For 128-bit WEP, enter 26 hex digits.

Key 1: _____________________________ Key 2: _____________________________ 

Key 3: _____________________________ Key 4: _____________________________ 

•

If WPA2-PSK or WPA-PSK Authentication is Used. 

–

Passphrase: ______________________________ These characters are case sensitive. 
Enter a word or group of printable characters. When you use WPA-PSK, the other devices 
in the network will not connect unless they are set to WPA-PSK as well and are configured 
with the correct Passphrase. 

Use the procedures below to set up basic security settings in the WN121T.

Note: The SSID in the wireless access point is the SSID you configure in the wireless 

USB adapter. For the access point and wireless nodes to communicate with 
each other, all must be configured with the same SSID.