Netgear 09300113 ユーザーズマニュアル

2-8

5. Verify wireless connectivity between your peer devices with the ping program:

a. On the Windows taskbar, select Start > Run.

b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type:

 

and then click OK.

A continuous ping is sent to the device with the 192.168.0.1 static IP address. The ping 
response should change to Reply.

At this point the connection is established. 

1. On the Settings tab of the Smart Wizard, select or type the network name (SSID).

2. Select the Computer-to-Computer (Ad Hoc) network type.

Note: If you cannot connect, see 

Note: for Windows Vista computers, you must have administrator rights. Otherwise, 

this option is not available for selection.