Netgear 09300113 ユーザーズマニュアル

2-9

3. Click Initiate Ad Hoc. The Ad Hoc Setting screen displays:

4. In the Start Ad Hoc drop-down list, select the wireless standard (802.11g or 802.11b) for your 

Ad Hoc computer-to-computer network.

5. In the Channel drop-down list, Automatic should work. If you notice interference problems 

with another nearby wireless device, select a channel that is not being used by other nearby 
wireless networks. Use the Networks tab to view the channels in use in your area.

6. Click OK.

Many networks use wireless security to encrypt wireless data communications. To connect to a 
network with wireless security, you must set up the wireless-N USB adapter with exactly the same 
kind of wireless security settings. If you use the Smart Wizard to set up security, you can take 
advantage of Push 'N' Connect (WPS) to set up WPA-PSK [TKIP] security. Otherwise, you can 
manually set one of the following types of wireless security used for home networks:

WPA-PSK [TKIP] or WPA2-PSK [AES]. See 

•

WEP. See 

For more information about wireless security, click the link to 

. 

Note: The channel number differs depending on the country. The connection speed 

automatically defaults to the highest speed.