Netgear 12100187 ユーザーズマニュアル

Hardware and Firmware Version. The model of the hardware and the currently running 
firmware version.

GUI Language Version. The currently selected language.

Internet Port Settings

MAC Address. The Ethernet MAC address of the DSL port.

IP Address. The DSL port IP address. If no address is shown, the router cannot connect to 
the Internet.

DHCP. Usually this is set to DHCP Client because the router obtains an IP address 
dynamically from the ISP. If set to None, the router uses a fixed IP address on the WAN.

IP Subnet Mask. The DSL port IP subnet mask.

Gateway IP Address. The IP address used as a gateway to the Internet for computers 
configured to use DHCP.

Domain Name Server. The router DNS server IP addresses. These addresses are usually 
obtained dynamically from the ISP.

LAN Port (Local Ports)

MAC Address. The router LAN port Ethernet MAC address.

IP Address. The router LAN port IP address. The default is 192.168.1.1.

DHCP. If Off, the router does not assign IP addresses to PCs on the LAN. If On, the router 
does assign IP addresses to PCs on the LAN.

IP Subnet Mask. The IP subnet mask used by the router LAN. The default is 255.255.255.0.

Wireless Port 

See 

Name (SSID). The Wi-Fi network name (SSID) for the wireless network. The default for a or 
n operation is NETGEAR-5G. The default for b or g operation is NETGEAR.

Region. The country where the unit is set up for use.

Channel. The current channel, which determines the operating frequency.

Mode. The current Mbps setting.

Wireless AP. Indicates if the access point feature is enabled. If disabled, the Wireless LED 
on the front panel is off.

Broadcast Name. Indicates if the router is configured to broadcast its SSID.

Wi-Fi Protected Setup b/g/n. This indicates whether Wi-Fi Protected Setup is configured for 
the b/g/n network.