Netgear 13200232 ユーザーズマニュアル

Wireless clients need to use the passphrase to access the wireless network through the 

router.

Click the Apply button.

This security option is not for home use but is typically used in a business or enterprise. 

WPA/WPA2 Enterprise does not use a passphrase but supports 802.1x authentication, which 

requires an internal or external RADIUS server. A Remote Authentication Dial In User 

Service (RADIUS) server provides Authentication, Authorization, and Accounting (AAA) 

management to grant (or deny) computers access to your wireless network.
WPA/WPA2 Enterprise can support WPA [TKIP] for WPA clients only, WPA2 [AES] for WPA2 

clients only, and WPA [TKIP] + WPA2 [AES], which is a combination of TKIP and AES 

encryption for both WPA and WPA2 clients. WPA clients are supported at speeds of up to 

54

  Mbps only. WPA2 clients are supported at speeds of up 300 Mbps.
WPA/WPA2 Enterprise supports five Extensible Authentication Protocol (EAP) authentication 

methods: EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, 

and EAP-SIM.



In the Security Options sections of the Wireless Settings screen, select the  WPA/WPA2 
Enterprise

 radio button.

Select the WPA mode (WPA [TKIP], WPA2 [AES], or WPA [TKIP] + WPA2 [AES]).

Type the IP address of the RADIUS server .
The address can be on your LAN on it can be an external address.

Enter the port number for the RADIUS server in the range  from 1 to 65535  (the default 

number is 1812).

Type the shared secret, which needs to b e between 1 and 128 characters (the default 

value is blank). 
The shared secret is case-sensitive.

Click the Apply button.