Netgear 13200232 ユーザーズマニュアル

Click the Generate button.
For 64-bit WEP, four different WEP keys are generated. For 128-bit WEP, only 

one WEP key is generated, and the four key fields are populated with the same 

WEP key.

If the authentication type is Shared Key:
a.

Specify the active key by selecting the  Key 1, Key 2, Key 3, or Key 4 radio 

button. 
Only one key can be the active key. 

Enter the value for the key manually:

For 64-bit WEP, enter 10 hexadecimal digits (any combination of 0–9, A–F). 

The key values are not case-sensitive.

For 128-bit WEP, enter 26 hexadecimal digits (any combination of 0–9, A–F). 

The key values are not case-sensitive.

Click the Apply button.



Select Basic > Attached Devices. 
The Attached Devices screen displays:

Wired devices are connected to the router through Ethernet cables. Wireless devices have 

joined the wireless network. 
The Wired Devices and Wireless Devices tables show the following information:

 (number). The order in which the device joined the network.

. The IP address that the router assigned to this device when it joined the 

network. Note that this number can change if a device is disconnected and rejoins the 

network.