Netgear 13200232 ユーザーズマニュアル

If you change the LAN IP address of the router while connected 

through the browser, you are disconnected. If this situation occurs, 

you need to open a new connection to the new IP address and log in 

again.



Select Advanced > Setup > LAN Setup. 
The LAN Setup screen displays:

Enter the settings that you want to customize. 
These settings are described in the following section, 

Click the Apply button.

The following settings are available on this screen:

. The LAN IP address of the router (by default, 192.168.1.1).

. The LAN subnet mask of the router (by default, 255.255.255.0). Combined 

with the IP address, the IP subnet mask allows a device to know which other addresses are 

local to it, and which have to be reached through a gateway or router.