Netgear 13300237 ユーザーズマニュアル
Advanced Settings
38
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
To configure LAN IP settings:
1.
In the main menu, under Advanced, select
LAN IP.
LAN IP.
2.
Specify these settings:
•
LAN IP Address. The factory default
setting is 192.168.0.1.
setting is 192.168.0.1.
•
Subnet mask. The network number
portion of an IP address. Unless you
are implementing subnetting, use
255.255.255.0 as the subnet mask.
portion of an IP address. Unless you
are implementing subnetting, use
255.255.255.0 as the subnet mask.
•
DHCP Server. The Yes radio button is
selected by default so the gateway acts
as a DHCP server, providing the
TCP/IP configuration for all the
computers connected to it.
selected by default so the gateway acts
as a DHCP server, providing the
TCP/IP configuration for all the
computers connected to it.
If you plan to assign IP addresses
manually, or you have another DHCP
server on your network, select the No
radio button.
manually, or you have another DHCP
server on your network, select the No
radio button.
•
Starting IP Address and Ending IP
Address. These fields specify the
range in the IP address pool.
•
Max Users. The maximum number of
users on the network.
users on the network.
•
DHCP Lease. For more information,
see
see
38.
3.
Click Apply.
Reserve an IP Address for DHCP Use
To reserve an IP address for DHCP use, enter the DHCP server reservation settings for the
private LAN in the LAN screen.
private LAN in the LAN screen.
To reserve an IP address for DHCP:
1.
In the main menu, under Advanced, select LAN IP.
2.
In the DHCP Reservation Lease Info section, enter the MAC address of the computer for
which you want to reserve an IP address.
which you want to reserve an IP address.
3.
Enter the permanent IP address for the computer.
4.
Click Add to save your settings.
The MAC address and IP address are displayed in the DHCP Client Lease Info table. The
current system time is also displayed.
current system time is also displayed.