Netgear wgr101 ユーザーズマニュアル
Reference Manual for the 54 Mbps Wireless Travel Router WGR101
Connecting the Router to the Internet
3-5
May 2004 (202-10034-01)
How to Log in to the Wireless Travel Router
You can always connect to the router to change its settings. These two switch settings enable you
to log in:
to log in:
•
Switch position 1: single wireless computer only access, no configuration access
•
Switch position 2: configuration and multiple wireless computer access as explained in
•
Switch position 3: configuration only via Ethernet or wirelessly connected computer as
explained in
explained in
below
•
Switch position 4: unused at this time
Follow these procedures to log in to the wireless travel router.
Figure 3-4: Switch position 3
1.
Set the switch to position 3.
2.
Connect the power cord to the wireless travel router and plug it into an outlet. The Power LED
lights up.
lights up.
Warning: Be sure to power on the wireless travel router before connecting the cable from the
computer. If you do not observe this sequence, you computer may time out and fail to connect.
computer. If you do not observe this sequence, you computer may time out and fail to connect.
3WITCH