AeroScout EX5500 ユーザーズマニュアル
EX5500 Controller Installation & Configuration Guide
25
Mounting the External LF Antenna on a Wall
•
Attach the External LF Antenna to the wall using the two screw mounts
located on the bottom casing.
located on the bottom casing.
Mounting the Controller or External LF using the
Exciter Mounting Clip
The Exciter Mounting Clip (Figure 19) accessory is sold separately from the
Controller. It can be used to mount the Controller or the External LF in deployments
Controller. It can be used to mount the Controller or the External LF in deployments
where mounting on the ceiling grid is not possible.
Figure 11: Exciter Mounting Clip (SKU: EXAC-140)
1.
Position the Mounting Clip on a standard 60cm (24") grid false ceiling.
a. Snap the Mounting Clip onto the topside of the T-Grid using the ‘snaps’ on the
ends of the clip.
Figure 12: Exciter Mounting Clip positioned on a grid of a false cieling
2.
Prepare the Ceiling Tile.
a. Measure and mark the required positions of the mounting screws on the ceiling
tile
b. Drill holes in the ceiling tile at the marked positions
3.
Mount the Controller or LF Antenna
a. Thread the screws (not provided) through the holes in the ceiling tile