Boston Scientific Neuromodulation Corporation PSC5210W ユーザーズマニュアル

ページ / 68
34
Physician Implant Manual
Charging Steps
WARNINGS:
• Do not charge while sleeping. This may result in a burn.
• While charging, the Charger may become warm. It should be 
handled with care.
• Failure to use the Charger with either the Charging Belt or an 
adhesive patch, as shown, may result in a burn. If pain or discom-
fort is felt, cease charging and contact Advanced Bionics.
The Charger Base Station should be plugged in and the Charger 
placed in the cradle until the indicator light is green. If the indicator is 
amber-colored, the Charger may not be able to fully charge the Stimu-
lator. 
Users must wear the Charger over the Stimulator using the Charging 
Belt or adhesive patches. Advanced Bionics recommends using the 
Charging Belt for charging.
1. When the indicator light is green, remove the Charger from the 
Base Station. (The indicator will go off, regardless of the ready 
status of the Charger
.)
2. Using the Adhesive Patch:
Apply the adhesive patch to the 
backside of the Charger by peeling 
the clear liner from the patch and 
applying the white side with the 
blue stripe to the rear of the 
Charger. Remove the skin side 
beige liner. (See diagram below.)
OR