Boston Scientific Neuromodulation Corporation PSC5210W ユーザーズマニュアル
Patient Remote Control
39
Stimulation Amplitude
The Level screen is the Remote Control’s “default” screen.
The Level screen is the Remote Control’s “default” screen.
Note: When there is no button activity for more than 60 seconds, the
Remote Control will transition to idle mode and the display
screen will be blank.
screen will be blank.
Press the S or T button from the Level screen to decrease or
increase amplitude.
increase amplitude.
The Level screen also displays a bar graphic in the top center to indi-
cate the battery charge level of the Stimulator. Three filled-in bars
represents a fully-charged battery. As the battery strength is reduced,
depending on the patient’s stimulation settings and usage, the bars
will “empty” accordingly. Patients are encouraged to recharge the
Stimulator at the first “Recharge Battery Soon” message displayed by
the Remote Control.
cate the battery charge level of the Stimulator. Three filled-in bars
represents a fully-charged battery. As the battery strength is reduced,
depending on the patient’s stimulation settings and usage, the bars
will “empty” accordingly. Patients are encouraged to recharge the
Stimulator at the first “Recharge Battery Soon” message displayed by
the Remote Control.
Coverage Area Selection
1. Press the
C
button as needed from the Level screen to cycle to a
specific stimulation coverage area.
2. Press the S or T button to adjust the amplitude of the selected
area.