ViVOtech Inc. VP8100N ユーザーズマニュアル
ViVOpay 8100e User Guide
12
Troubleshooting and Maintenance
Onboard Diagnostics
The ViVOpay 8100e has a built-in diagnostics program accessible through the RS232 interface. If
you did not purchase an RS232 data cable with your ViVOpay 8100e, you will need one to access
the diagnostic tests. The Onboard Diagnostics (OBD) tests the following components of the ViVOpay
8100e.
you did not purchase an RS232 data cable with your ViVOpay 8100e, you will need one to access
the diagnostic tests. The Onboard Diagnostics (OBD) tests the following components of the ViVOpay
8100e.
Accessing the OBD Tests
To connect the ViVOpay 8100e to a terminal emulator
1.
Connected the RS232 data cable to the ViVOpay 8100e as described in
.
2.
Launch the terminal emulation program and set the serial communication parameter of
the terminal emulation program to the following:
the terminal emulation program to the following:
Baud rate: 115200
Parity: none
Data bit: 8
Stop bit: 1
Flow control: none
3.
Connect the BD-9 end of the data cable to the COM port of a computer running a terminal
emulation program.
emulation program.
To enter the Onboard Diagnostics
1.
Power off the ViVOpay 8100e by removing the power supply from the power receptacle.
2.
Plug the power supply back into the power receptacle.
Test
Possible Results
LCD Test
Pass/Fail
Touch Screen Test
Pass/Fail. This test is not valid for the ViVOpay 8100e.
Key Test
Pass/Fail 1234567890<cancel><clear><enter>
LED Test
Pass/Fail
Buzzer Test
Pass/Fail
Magstripe Test
Pass Tracks 1 or 2 or 3/Fail
RFID Test
Pass Type A or B/Fail
Security Keys Test
KPK, DUKPT, Master 1234567890