KROHNE FMCW80G74TA ユーザーズマニュアル
6
OPERATION
84
OPTIWAVE 7500 C
www.krohne.com
10/2016 - 4004375401 - MA OPTIWAVE 7500 R01 en
6.4.3 HART® network configuration
The device uses HART® communication to send information to HART®-compatible equipment. It
can operate in either point-to-point or multidrop mode. The device will communicate in
multidrop mode if you change the polling address.
can operate in either point-to-point or multidrop mode. The device will communicate in
multidrop mode if you change the polling address.
How to change from point-to-point to multidrop mode
• Enter Program mode.
• Push 2 × [
• Push 2 × [
], [>>>>], 4 × [
], 2 × [>>>>], [
] and 2 × [>>>>] to go to menu item C5.1.2.1 Polling Adress.
• Enter a value between 001 and 063 and push [^
^
^
^] to confirm.
• Push [^
^
^
^] again and again to go back to the Save Configuration
Save Configuration
Save Configuration
Save Configuration screen.
• Push [
] or [
] to set the screen to "Yes" and push [^
^
^
^].
•
[^
^
^
^] to confirm.
Graph with the results of the empty
spectrum recording.
•
[
] or [
] to change the parameter
("No" or "Yes".
•
[^
^
^
^] to confirm.
Save spectrum? If you set the menu item to
"Yes", the device will keep this empty
spectrum recording. If you set the menu
item to "No", the device will reject this data.
•
[
] or [
] to change the parameter
("Disable" or "Enable".
•
[^
^
^
^] to confirm.
Empty Spectrum Enable. If you set the menu
item to "Enable", the device will use the
empty spectrum recording data. If you set
the menu item to "Disable", the device will
not use the empty recording data at this
time.
•
4 × [^
^
^
^] to confirm.
•
[
] or [
] for the selection of the
save option (Yes, No or Back).
•
[^
^
^
^] to confirm.
Save Configuration?
Save Configuration?
Save Configuration?
Save Configuration? screen.
Set to "Yes" to save and use the settings and
data and go back to Normal Mode. Set to
"No" to cancel the changes to the device
settings and go back to Normal Mode. Set to
"Back" to stay in Program Mode.
INFORMATION!
For more data, refer to Networks on page 37
For more data, refer to Networks on page 37
.
Screen
Steps
Description
CAUTION!
Make sure that the address for this device is different from others in the multidrop network.
Make sure that the address for this device is different from others in the multidrop network.