Norsat International Inc. NSLK3200 ユーザーズマニュアル
Norsat NewsLink
099-20003-01OM
Norsat
Page 25
iii. Elevation fastening collars: quantity 2
FIGURE 12.
Elevation Rod, Knobs and Nuts.
2.
Remove the two elevation fastening collars and one quick action knob
from the elevation rod.
from the elevation rod.
3.
Slide the first quick action knob onto the elevation rod to the required
position, approximately 1/3” from the bottom, by depressing button.
position, approximately 1/3” from the bottom, by depressing button.
4.
Insert the elevation rod through the elevation base support hole, from the
underside of the base; refer to Figure 13 on page 25.
underside of the base; refer to Figure 13 on page 25.
FIGURE 13.
Elevation Base Support Hole.
5.
Slide the second quick action knob onto the elevation rod to required
position by depressing the button; refer to Figure 14 on page 26.
position by depressing the button; refer to Figure 14 on page 26.