Chung Nam Electronics Co. Ltd. WLC312NRM ユーザーズマニュアル
User Manual
- 10 -
Figure 2-6 Profile setting
To create a new profile, please click the tab Profile, and select the button Add and
then Edit to create and edit new profile:
● Profile Name - Up to 32 alphanumerical characters and symbols, space is not
allowed in this field.
● SSID - The SSID of the wireless access point or wireless device you selected will
be displayed here. In case the SSID of access point or wireless device is not available,
you are requested to input the SSID manually.
● PSM - Please select CAM (constantly Awake Mode) in case you want to keep the
wireless radio activity even if there is no data transfer. Or you can select the PSM
(Power Saving Mode) while the radio activity will be switched off when there is no
data transfer. It’s recommended to choose ‘PSM’ if you’re using this WLAN card
with notebook computer in order to save the battery power.
● Network Type - Select network type (‘Ad Hoc’ or ‘Infrastructure’). If you’re
adding a profile from an existing access point or wireless device, it’s automatically
selected
● Preamble - This option is only available when the network type is ‘Ad hoc’. You
can select Auto or Long Preamble. Please select Auto if you don’t know what it is.
● RTS - Threshold Check the box and you can set RTS threshold manually here. Do
not modify default setting unless you know what it is.
● Fragment Threshold - Check the box and you can set fragment threshold manually
here. Do not modify default setting unless you know what it is.
You can also add a connection to the wireless access point or wireless by clicking the
tab Network, and select the button Add to Profile as Figure 2-7 to add a new profile,
and set the parameter for the new profile.
You can click the tab Auth.\ Encry whose figure as figure 2-7 to set the encryption
and authentication settings.
and authentication settings.
● Authentication Type - Select the authentication type of the wireless access point or
wireless device you wish to connect. If you’re adding a profile from an existing
access point or wireless device, the value will be selected automatically, and please do
not modify it. If you select LEAP, the following message will be displayed. Please
input LEAP identity, password, domain name, and select encryption type. You can
click the button Show Password so the password you inputted will be displayed as
you type, but not replace by asterisk.
● Encryption-Select the encryption type of the wireless access point or wireless
device you wish to connect. If you’re adding a profile from an existing access point or
wireless device, the value will be selected automatically, and please do not modify it.
● WPA Preshared Key-Input WPA preshared key here. If encryption is not, or you
select ‘WEP’ as encryption type, this field will be disabled and grayed out.
● WEP Key-You can select key type (Hex or ASCII) and input WEP key here. If
wireless device you wish to connect. If you’re adding a profile from an existing
access point or wireless device, the value will be selected automatically, and please do
not modify it. If you select LEAP, the following message will be displayed. Please
input LEAP identity, password, domain name, and select encryption type. You can
click the button Show Password so the password you inputted will be displayed as
you type, but not replace by asterisk.
● Encryption-Select the encryption type of the wireless access point or wireless
device you wish to connect. If you’re adding a profile from an existing access point or
wireless device, the value will be selected automatically, and please do not modify it.
● WPA Preshared Key-Input WPA preshared key here. If encryption is not, or you
select ‘WEP’ as encryption type, this field will be disabled and grayed out.
● WEP Key-You can select key type (Hex or ASCII) and input WEP key here. If