Chung Nam Electronics Co. Ltd. WLC312NRM ユーザーズマニュアル
User Manual
- 12 -
access point or wireless device.
4. Click the wireless access point or network device been selected, it will be
4. Click the wireless access point or network device been selected, it will be
highlighted as the Figure 2-7, then click Connect.
If the access point be selected does not enable encryption (The content of Encryption
field of the access point you selected None, you’ll be connected to this wireless
access point within one minute). Please jump to next step. If the access point you
selected enables encryption, please proceed to next step.
5. If the wireless access point uses encryption, please setting in the dialog box as
field of the access point you selected None, you’ll be connected to this wireless
access point within one minute). Please jump to next step. If the access point you
selected enables encryption, please proceed to next step.
5. If the wireless access point uses encryption, please setting in the dialog box as
Figure 2-7, you have to input WEP passphrase or WPA preshared key. Please
ask the owner of the wireless access point you want to connect, and input the
correct passphrase / preshared key here, then click OK.
ask the owner of the wireless access point you want to connect, and input the
correct passphrase / preshared key here, then click OK.
6. You’ll see Connected <-> SSID (SSID is the SSID of the wireless access point or
wireless device you connected to) message displayed at lower-left corner of
configuration utility as the Figure 2-8. Congratulations, you have successfully
connected to the access point or wireless device you be selected.
configuration utility as the Figure 2-8. Congratulations, you have successfully
connected to the access point or wireless device you be selected.
Figure 2-8 the status of Congratulations
7. Open the tab Advanced as the Figure 2-9, you can set some advanced setting in
here.