Marasst Incorporation 05001 ユーザーズマニュアル
21
Engli
sh
Troubleshooting
1. I can’t turn the power on.
• Ensure that you have connected the power
adapters correctly (see Using the Batteries
and Adapters on page 12) or, if you are
using batteries, that they still have some
power left.
and Adapters on page 12) or, if you are
using batteries, that they still have some
power left.
2. An image doesn’t appear on the video monitor/
receiver.
• Make sure the camera/transmitter and the
video monitor/receiver are set to the same
channel and that you have turned them
both on. See Setting Channels on page 15.
channel and that you have turned them
both on. See Setting Channels on page 15.
3. How do I select a channel to avoid interference?
• When using only one transmitter and
receiver, make sure they are set to the same
channel. If more than two receivers or
transmitters are used within a short dis-
tance of each other, set the channels as far
apart as possible, for example, Channel 1
and Channel 4. If possible, place the units
farther apart from each other.
channel. If more than two receivers or
transmitters are used within a short dis-
tance of each other, set the channels as far
apart as possible, for example, Channel 1
and Channel 4. If possible, place the units
farther apart from each other.
4. Why does signal fading occur?
• Slight fading occurs due to weather, build-
ing structures, crowding of people and
interference from other RF signals. Occa-
sional fading is normal. To prevent fading,
place the receiver in a clear location.
interference from other RF signals. Occa-
sional fading is normal. To prevent fading,
place the receiver in a clear location.