Marasst Incorporation 05001 Manual Do Utilizador

21

1. I can’t turn the power on.

• Ensure that you have connected the power 

adapters correctly (see Using the Batteries 
and Adapters on page 12) or, if you are 
using batteries, that they still have some 
power left.

2. An image doesn’t appear on the video monitor/

receiver.

• Make sure the camera/transmitter and the 

video monitor/receiver are set to the same 
channel and that you have turned them 
both on. See Setting Channels on page 15.

3. How do I select a channel to avoid interference?

• When using only one transmitter and 

receiver, make sure they are set to the same 
channel. If more than two receivers or 
transmitters are used within a short dis-
tance of each other, set the channels as far 
apart as possible, for example, Channel 1 
and Channel 4. If possible, place the units 
farther apart from each other.

4. Why does signal fading occur?

• Slight fading occurs due to weather, build-

ing structures, crowding of people and 
interference from other RF signals. Occa-
sional fading is normal. To prevent fading, 
place the receiver in a clear location.