Mobilicom ltd. MCU-100 ユーザーズマニュアル
MC-EMA Product Description and Operational Manual
Page : 8 / 22
8) In order to verify that the MCU-100 is working (when there is no link) the MCU-100 can be
connected to a PC via Ethernet or RS232. When connected to a PC EMA can be run and get
some of the indications. The rest of the indications such as Link status, CINR, RSSI and
bandwidth are not relevant and will not be displayed.
9) Power Feed:
a. The device can be powered only via battery and not via AC/DC transformer.
b. The device can be marketed as battery powered only.
c. Communication and power harness can be supplied by Mobilicom as an auxiliary
cable, but can also
be manufactured according to Mobilicom’s spec. The cable should
contain at least a 1GE and one power as a minimum, yet it is recommended that the
RS232 will be added as well. The Power line must contain a 4A fuse.
d. Voltage Regulation: 33% =(12-9)/9*100%
e. Battery Types that can be used:
Voltage:
12VDC
Max Current:
3A
Recommended AH: 24AH (for 8 hours operation)
f. Connecting the Battery:
Connect the Black Cable labeled -12VDC to the - of the Battery
Connect the Red Cable labeled +12VDC to the + of the Battery
g. Disconnecting the Battery:
Disconnect the Red Cable labeled +12VDC to the + of the Battery
Disconnect the Black Cable labeled -12VDC to the - of the Battery