Cardo Systems ER01 ユーザーズマニュアル
scala-rider manual
DRAFT APRIL 25, 2005
Page 13 of 31
5.2 Power
On/Off
To turn ON, press and hold the CTRL button for at least 6 seconds until
the Blue LED flashes three times and an ascending alert tone is heard.
Quickly release the button.
To turn OFF the headset, press and hold the CTRL button for at least 3
seconds until the Red LED flashes three times and an alert tone is heard.
the Blue LED flashes three times and an ascending alert tone is heard.
Quickly release the button.
To turn OFF the headset, press and hold the CTRL button for at least 3
seconds until the Red LED flashes three times and an alert tone is heard.
5.3 Renewed
Pairing
If you wish to use different phone or in case you need to repeat the pairing
process for any other reason, please proceed as follows:
6.3.1 Turn the headset off.
6.3.2 Press the CTRL button for 10 seconds until the red and blue LEDs
process for any other reason, please proceed as follows:
6.3.1 Turn the headset off.
6.3.2 Press the CTRL button for 10 seconds until the red and blue LEDs
begin flashing rapidly alternating.
6.3.3 Follow sections 5.1.3 to 5.1.6 above
5.4
5.4
Reconnecting the scala-rider headset to a paired phone
Although you may have previously paired your headset to your phone,
each time you turn one of them off, some phones require that you re-
establish the connection.
Reconnecting may also be necessary when your headset and phone have
lost the radio signal because the distance between them has exceeded 30
feet or 10 meters. After you have turned on your mobile phone, there are
several methods to reestablish the connection:
• Turning the headset on should reconnect it automatically to the phone.
• With some mobile phones you need to reestablish the link to your headset
by using your phone’s menu. Please refer to your mobile phone’s manual
for operating instructions.
• Assuming your mobile phone features voice activation, tap the CTRL
button on your scala-rider headset. This will activate your voice dial
function on the phone, indicating that the connection is established.
• Do nothing. Once a call is received, answer by pressing the CTRL button.
each time you turn one of them off, some phones require that you re-
establish the connection.
Reconnecting may also be necessary when your headset and phone have
lost the radio signal because the distance between them has exceeded 30
feet or 10 meters. After you have turned on your mobile phone, there are
several methods to reestablish the connection:
• Turning the headset on should reconnect it automatically to the phone.
• With some mobile phones you need to reestablish the link to your headset
by using your phone’s menu. Please refer to your mobile phone’s manual
for operating instructions.
• Assuming your mobile phone features voice activation, tap the CTRL
button on your scala-rider headset. This will activate your voice dial
function on the phone, indicating that the connection is established.
• Do nothing. Once a call is received, answer by pressing the CTRL button.