Aruba Networks 651 ユーザーズマニュアル

Aruba 650 Series Multi-Service Mobility Controller | Installation Guide

Aruba 650 Series Installation | 13

The following tools and equipment are required for installation of an Aruba 650 Series controller.

z

Rack Mount Bracket (x2, not used for tabletop installation)

z

6-32 x 1/4” Phillips Flat Head Screws (4x, included with rack mount brackets)

z

12-24 x 5/8” Phillips Flat Head Screws (4x, 19-inch (48.26 cm) rack system mount screws).

z

Suitable Screwdrivers for both screw types.

z

AC Power Cord (country-specific)

z

Left and right side bezels (not used for rack mounting)

To install an Aruba 650 Series controller into a 19-inch (48.26 cm) rack system:

1. Place a rack mount bracket over the mounting holes on one side of the controller (see 

2. Secure the bracket to the controller using two 6-32 x 1/4” phillips flat head screws and a suitable screwdriver.

3. Repeat these steps on the opposite side of the controller. 

Figure 6  Rack Mount Brackets

LINK/

ACT

POE

CONSOLE

0       1        2       3

4          5           6            7

LINK/

ACT

1000

LINK/

ACT

LINK/

ACT

6-32 x 1/4” Phillips Flat Head Screws
(4x, 2x per bracket)

Rack Mount Bracket (2x)