Hewlett Packard Enterprise Company ARUBA52 ユーザーズマニュアル
Setup & Installation
23
Chapter 2
7/29/03 FINAL DRAFT—CONFIDENTIAL
Suspended Ceiling Mount
Place the Aruba 52 into the mounting cradle as shown in
.
Use the T-rail clips, nylon washers, and nuts included in the optional mounting kit
to attach the Aruba 52 to the underside of a suspended ceiling.
to attach the Aruba 52 to the underside of a suspended ceiling.
F
IGURE
2-7 Mounting on a Suspended Ceiling
The T-rail clips twist onto the rails used with standard suspended-ceiling systems. Place the
T-rail clips approximately 15 cm (6 inches) apart at the location where the Aruba 52 will be
installed. Use the mounting cradle to gauge the appropriate distance between the clips.
T-rail clips approximately 15 cm (6 inches) apart at the location where the Aruba 52 will be
installed. Use the mounting cradle to gauge the appropriate distance between the clips.
Use the nylon washers to insolate the cradle from electrical contact with the T-rail. Make sure to
insert the raised ridge of the lower washers fully into the cradle mounting holes as shown above.
insert the raised ridge of the lower washers fully into the cradle mounting holes as shown above.
Orient the antennas.
For best performance, swivel the antennas so that they are oriented vertically (see
). Once mounting is complete, connect the required cables (see instructions on
).
1
2
RE
AD
LA
N
.A
.B
Cradle
T-Rail
Clip
Washers
Nut
Side View
3