Viewsonic Pro9500 PRO9500 ユーザーズマニュアル

Installation

236

ViewSonic 

Pro9500

NOTES for all users

  • For details on PERFECT FIT, refer to PERFECT FIT 

of EASY MENU or OPTION menu in the Operating Guide.
• When arranging the projectors side by side (Style 2), it is also necessary to 

adjust the image position of one projector in accordance with the other projector 

as explained above. 
• It is strongly recommended to use a flat screen.  If a curved or skewed screen 

is used, it is very difficult to align the two images even if you use the pin/barrel 

adjustment of PERFECT FIT.
• Even through fine adjustment of the images from the two projectors, it may 

not be possible to superimpose the images well enough depending on the input 

signals.  In this case, try the following methods.

-  Press the 

AUTO button on the remote control or execute AUTO ADJUST 

EXECUTE (Operating Guide → IMAGE menu) on each of the projectors.

-  Adjust H POSITION and V POSITION (Operating Guide → IMAGE menu) on 

each of the projectors.

-  Check the RESOLUTION setting in the INPUT menu, and change to the 

same setting if the setting differs between Main and Sub. (Operating Guide → 

INPUT menu) 

5.

 Using PERFECT FIT on Set B, adjust the im-

age size and position of Set B to superimpose 

well to the image of Set A.  It is recommended 

to adjust in the following ways.
(1) Roughly adjust the four corners in the 

order below.
Top left → Top right → Bottom right → Bottom left

(2) Fine adjust the four corners in the same way.

For Simple Stack users

1.

 Press the 

MENU button on the remote control to display the menu on Set A.

2.

 Use the ▲/▼/◄/► buttons to open the 

TEMPLATE dialog, then select STACK on the 

dialog. (Operating Guide → SCREEN menu)

3.

 Press the 

MENU button on the control panel of 

Set B to display the menu.

4.

 Use the ▲/▼/◄/► buttons to select 

PERFECT FIT from EASY MENU, or the 

SETUP menu of ADVANCED MENU. (Operat-

ing Guide → EASY MENU or SETUP menu)  

PERFECT FIT dialog appears on screen.