Viewsonic Pro9500 PRO9500 ユーザーズマニュアル

237

ViewSonic 

Pro9500

3.1 Displaying STACK menu

Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION 

   > SERVICE > COMMUNICATION > STACK

STACK menu will appear on screen.  (Operat-

ing Guide → OPTION menu) The setting for 

Intellectual Stack operation starts from this menu.

Set the Intellectual Stack operation using the STACK menu.

NOTE

  • If you are using Simple Stack without RS-232C connection, skip this 

chapter.
• If you do not need to change the settings made during the installation 

explained prior to this chapter, go to 3.3 Selecting lamp operation mode. 

• Read 3.7 Important information for Intellectual Stack carefully.   

NOTE 

 • Check that the following settings are made on both projectors.  

Otherwise, STACK menu on the projectors cannot be operated. 
-  STANDBY MODE in SETUP menu: NORMAL 

(Operating Guide → SETUP menu)

-  COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF 

(Operating Guide → OPTION menu)

- STACK LOCK in SECURITY menu: OFF 

3. STACK menu settings