Sensors & Software Inc. NG250 ユーザーズマニュアル
Noggin
4-SmartCart Assembly
15
4.6 Attach the Digital Video Logger (DVL)
The bottom of the Digital Video Logger is designed to slide onto the support shelf attached to the
SmartCart (Figure 4-14). Line up the bottom of the DVL with the shelf and slide it back onto the
shelf. Push the DVL back far enough so that the flexible clip on the front of the shelf catches and
holds the DVL firmly in place. Wiggle the DVL to make sure it is firmly snapped in before letting
go of the unit. To remove the DVL from the SmartCart, flex the clip downward as the DVL is slid
forward off of the shelf.
SmartCart (Figure 4-14). Line up the bottom of the DVL with the shelf and slide it back onto the
shelf. Push the DVL back far enough so that the flexible clip on the front of the shelf catches and
holds the DVL firmly in place. Wiggle the DVL to make sure it is firmly snapped in before letting
go of the unit. To remove the DVL from the SmartCart, flex the clip downward as the DVL is slid
forward off of the shelf.
Figure: 4-14 Attaching the digital video logger (DVL). Step 1: Depress flexible clip. Step 2: Slide DVL onto shelf.
The DVL can be pivoted to adjust the view angle. If it is difficult to pivot the DVL, slightly loosen
the hand screws on the bottom of the support shelf.
the hand screws on the bottom of the support shelf.
Once the DVL is in place, attach the cable with the 37-socket female D-connector to the 37-pin
receptacle on the back of the Digital Video Logger. This attachment can be secured with the
latch.
receptacle on the back of the Digital Video Logger. This attachment can be secured with the
latch.