Sensors & Software Inc. NG250 ユーザーズマニュアル
Noggin
6-SmartHandle Assembly (Noggin 500 & 1000 only)
29
6
SmartHandle Assembly (Noggin 500 & 1000 only)
The Noggin 500 and 1000 can be operated in the SmartHandle configuration.
The fully assembled Noggin 500 SmartHandle system is shown in Figure 6-1. The Noggin 1000
SmartHandle system looks very similar.
SmartHandle system looks very similar.
Figure: 6-1 Noggin 500 SmartHandle system.
Normally the SmartHandle system is used in the “push” configuration shown in Figure 6-1. In
some situations the “pull” configuration may be a more desirable. Figure 6-7 shows the
SmartHandle system in this configuration.
some situations the “pull” configuration may be a more desirable. Figure 6-7 shows the
SmartHandle system in this configuration.
Note that most Noggin SmartHandle systems come from the factory partially assembled with the
odometer bracket, Noggin-to-DVL cable and the handle base already attached to the Noggin
unit.
odometer bracket, Noggin-to-DVL cable and the handle base already attached to the Noggin
unit.