Sensors & Software Inc. NG250 ユーザーズマニュアル
Noggin
8-Connecting GPS
41
8
Connecting GPS
For all Noggin configurations, a GPS with a serial output cable can be attached directly to the 9-
pin serial port on the back of the DVL (Figure 8-1). The DVL can be configured to read in the
GPS data and store it along with the GPR data (Section 12.3.5 GPS Parameters).
pin serial port on the back of the DVL (Figure 8-1). The DVL can be configured to read in the
GPS data and store it along with the GPR data (Section 12.3.5 GPS Parameters).
Figure: 8-1 GPS connect to the back of the DVL using a serial connection. GPS supplied with IceMap come with a
battery splitter cable to power the GPS from the IceMap battery.
The GPS requires power. User-supplied GPS’s will need to be powered using a separate battery.
GPS supplied by Sensors & Software come with a battery splitter cable to allow the 12 Volt
system battery to power both the Noggin system and the GPS (Figure 8-1).
system battery to power both the Noggin system and the GPS (Figure 8-1).