Sensors & Software Inc. NG250 ユーザーズマニュアル

9-Digital Video Logger (DVL)

Noggin

44

When collecting data with a Smart System, the DVL is powered by the system battery.  It is
possible to detach the DVL from the Smart System and use it away from the system to review
data. There are 2 ways to power the DVL away from the Smart System: 

1)

The optional DVL to Power Supply Cable allows the user to power the DVL away
from the Smart System using the system battery.  As shown in Figure 9-2, the cable
connects the battery to the 9-socket connector on the back of the DVL. 

2)

To avoid having to use the system battery to power the DVL, an optional AC power
supply is available.  This, when combined with the DVL II to Power Supply Cable,
allows the user to power the DVL away from the Smart System using AC power.  As
shown in Figure 9-3, the AC power supply connects to the DVL II to Power Supply
Cable which connects to the 9 socket connector on the back of the DVL. 

For convenience during data acquisition, especially when using the SmartTow and SmartHandle
configurations, the DVL can be carried using the optional DVL Carrier shown in Figure 9-2.

The bottom of the DVL is designed to slide onto the support shelf on the DVL Carrier.  Line up the
bottom of the DVL with the shelf and slide it back onto the shelf. Push the DVL back far enough
so that the flexible clip on the front of the shelf catches and holds the DVL firmly in place. Wiggle
the DVL to make sure it is firmly snapped in before letting go of the unit. To remove the DVL from
the DVL Carrier, flex the clip downward as the DVL is slid forward off of the shelf.