Sensors & Software Inc. PE-PRO-TLF-A ユーザーズマニュアル
2-System Assembly and Startup
pulseEKKO PRO TLF-A Transmitter
6
2.3
Adding Optional Items
2.3.1 Fiber Optic Remote Trigger and Beeper Unit
To attach the Fiber Optic Remote unit to the pulseEKKO Pro deluxe handles, remove the screw
near the top of one of the handles. Then attach the two pieces of the handle attachment
assembly (Figure 2-3) and replace the screw as shown. Now press the Fiber Optic Remote onto
the handle and twist it a quarter-turn into place.
near the top of one of the handles. Then attach the two pieces of the handle attachment
assembly (Figure 2-3) and replace the screw as shown. Now press the Fiber Optic Remote onto
the handle and twist it a quarter-turn into place.
Figure: 2-3
For PVC handles, attach the Fiber Optic Remote to the handle as shown in Figure 2-4.
Figure: 2-4
To connect up the fiber optic remote trigger and beeper unit you should have a dual fiber optic
cable for the console to transmitter connection plus a short single fiber optic cable (Figure 2-5).
One of the two cables on the dual fiber optic cable will, if the above directions were followed,
already be connected from the red transmitter receptacle on the console to the black (INPUT)
receptacle on the transmitter.
cable for the console to transmitter connection plus a short single fiber optic cable (Figure 2-5).
One of the two cables on the dual fiber optic cable will, if the above directions were followed,
already be connected from the red transmitter receptacle on the console to the black (INPUT)
receptacle on the transmitter.