Vivato Inc. VLJ24WFSW ユーザーズマニュアル
92
Vivato 2.4 GHz Wi-Fi Switch User Guide
Services, Password, Config, and Firmware Web Pages
Quick Setup
Adding a Remote Host to The Firmware Transfer List
You can create a list of remote hosts in which you want to save the new firmware. For each host,
enter the Remote Host name or IP address, and the Remote Password (read password) for that
host. When Add Host is selected, that host is shown in the “Remote Hosts Marked for Firmware
Transfer” list.
enter the Remote Host name or IP address, and the Remote Password (read password) for that
host. When Add Host is selected, that host is shown in the “Remote Hosts Marked for Firmware
Transfer” list.
Removing a Remote Host from the Firmware Transfer List
To remove a host from this list, check the corresponding “Mark Host for Removal” box and
select Remove Host.
select Remove Host.
Selecting the Local Image to Transfer
Use the “Select Local Firmware Image” drop-down menu to select the firmware image to
transfer to the remote hosts listed in the firmware transfer list. The firmware is transferred to
each host when you select Change FW Image.
transfer to the remote hosts listed in the firmware transfer list. The firmware is transferred to
each host when you select Change FW Image.
Quick Setup
Displays the initial Quick Setup screen to access the quick setup pages and make any changes. See
Important
The Wi-Fi Switch can contain a maximum of two firmware images. If two images already
exist in memory, you need to remove one of the images (typically the older image) before
loading a new image.
exist in memory, you need to remove one of the images (typically the older image) before
loading a new image.