Vivato Inc. VLJ24WFSW ユーザーズマニュアル
Vivato 2.4 GHz Wi-Fi Switch User Guide
115
Command Line Interface
Enable Level Command Descriptions
Figure 60—
Example “show snmp-server” Output
show uptime
Displays the of day, how long the switch has been up since it was last rebooted (days, hours,
minutes), the number of users that have accessed the switch, and the average load through the
switch.
minutes), the number of users that have accessed the switch, and the average load through the
switch.
show version
Displays information about the version of software that is installed in the switch.
Enable Level Show Commands
The following Show commands are only available at the enable level:
show flash:
Displays the names of configuration files that have been saved in the Wi-Fi Switch.
Configuration files are saved using the
Configuration files are saved using the
show running-config
Displays the current running configuration of the Wi-Fi Switch, including any dynamic settings
that are in effect.
that are in effect.
traceroute <ipaddress|hostname>
Displays information about the network route used to access the specified destination address or
host name. If the specified address or host is not found, the Wi-Fi Switch continues to try to locate
it until you press the Ctrl-C keys.
host name. If the specified address or host is not found, the Wi-Fi Switch continues to try to locate
it until you press the Ctrl-C keys.
Enable Level Command Descriptions
Refer to these sections for descriptions of commands that are available at the “enable” level (see
harvey(config)#show snmp-server
snmp-server contact george
snmp-server location upstairs closet
snmp-server name clydesdale
snmp-server community public RO
snmp-server community private RW
snmp-server community icehouse RW 192.163.20.1
snmp-server engineID A52D
snmp-server
!
harvey(config)#
snmp-server contact george
snmp-server location upstairs closet
snmp-server name clydesdale
snmp-server community public RO
snmp-server community private RW
snmp-server community icehouse RW 192.163.20.1
snmp-server engineID A52D
snmp-server
!
harvey(config)#