Vivato Inc. VLJ24WFSW ユーザーズマニュアル
116
Vivato 2.4 GHz Wi-Fi Switch User Guide
Command Line Interface
Enable Level Command Descriptions
configure [terminal]
This command tells the CLI to use your terminal to configure the switch after accessing the enable
level (see
level (see
on page 105). After entering this command, the command prompt changes to
vivato (config)$ to indicate that you can now enter the following configuration commands.
Commands for Managing Configuration Files
The following commands are used to copy, write (save), delete, and retrieve configuration files to
configure the Wi-Fi Switch. All of these commands are available at the enable level prompt,
Vivato#, but are not available at the configuration prompt, Vivato(conf)#.
configure the Wi-Fi Switch. All of these commands are available at the enable level prompt,
Vivato#, but are not available at the configuration prompt, Vivato(conf)#.
configure network flash: <filename>
This command is used to configure the switch using a saved configuration file. To view the
currently saved configuration files, use the
currently saved configuration files, use the
Table 5—
Enable Level Commands