Vivato Inc. VLJ24WFSW ユーザーズマニュアル

The amount of time, in minutes, used to measure client authentication errors for the 

 command. The value must be in the range of 1 to 60; 20 is typical.

Enter the connection information required by the RADIUS server. The default is set for 
Win2000 IAS as follows: CONNECT_11Mbps_802.11b. Other RADIUS servers may have 
different settings.

Enter the length of time, in minutes, that the 

 command uses to 

measure encryption errors in packets before disassociating the client from the Wi-Fi Switch. 
The value must be in the range of 1 to 10; 5 is typical.

Enter the name of the interface used to access the RADIUS authentication server, such as 
“bridge 0”. An IP address must be assigned to this interface and the interface must be currently 
enabled, otherwise the setting is not made and an error message is displayed.

Enter the maximum amount of authentication errors that occur within the time specified by the 
auth-threshold that are allowed during the authentication attempt before an authentication 
failure is reported and the client is blocked from further authentication attempts. The range is 
1-10; 3 is typical. 

Enter the maximum number of encryption errors from the client that are allowed during the time 
specified in 

 before an authentication failure is reported. The 

range is 1-10; 3 is typical.

Enter the network access device name. This is the name of the switch defined as the RADIUS 
server client for authentication.

Enter the RADIUS authentication server secret number in the range of 1 to 4, and the shared 
secret string in the range of 22 to 255 characters. The secret appears as clear text as it is entered.

Enter the RADIUS authentication server secret number in the range of 1 to 4, and press the 
Enter key. You are prompted to enter the shared secret string in the range of 22 to 255