Vivato Inc. VLJ24WFSW ユーザーズマニュアル
76
Vivato 2.4 GHz Wi-Fi Switch User Guide
Security Configuration Web Pages
Configuring Security
Configuring WEP in Your Client
See
on page 68 for a description of WEP.
With the client enabled and close enough to the Wi-Fi Switch to receive its wireless signal, use
the following steps to configure WEP.
the following steps to configure WEP.
Step 1.
Click on the Wireless Networks tab in the Wireless Network Connection window and
select the Vivato entry (see
).
If the ESSID for the Wi-Fi Switch’s wireless interfaces has been changed, use that entry
instead.
instead.
If you are not receiving the Wi-Fi Switch’s signal (no ESSID is shown), verify that a
wireless interface has been enabled on the Wi-Fi Switch. See
Step 2.
Click Configure to display the WEP settings.
Step 3.
Check the box next to “Data encryption (WEP enabled)”.
Step 4.
Un-check the box for automatic WEP key assignment and enter the WEP key(s). WEP
keys are automatically assigned only when using EAP security.
Figure 35—
Configuring WEP in Your Client
Un-check this box...
and enter your WEP key
information in these fields.
information in these fields.
2
1
3
4
3
Vivato