JADAK a business unit of Novanta Corporation MERCURY4 ユーザーズマニュアル
44
Network Settings: Ethernet Interface
Setting
Description
Use DHCP?
If set to Yes, the reader will automatically look for its LAN IP, Netmask and
Gateway addresses from a
Gateway addresses from a
DHCP
Server.
Vendor Class Identi-
fier
fier
This radio button that enables 96-bit tag support. To optimize the reader keep
this setting turned off unless it is needed.
this setting turned off unless it is needed.
Use DHCP Server-
supplied Host-
name?
supplied Host-
name?
If set to Yes, the manually supplied hostname (see Hostname) will be overridden
by the hostname supplied by the DHCP Server.
by the hostname supplied by the DHCP Server.
LAN IP Address
If “Use DHCP?” is set to Yes, the LAN IP, Netmask and Gateway values will be
supplied by the DHCP Server. Default or manually entered addresses will be
dimmed out and bypassed. If Use DHCP? is set to No, you should manually
enter the LAN IP, Netmask and Gateway settings.
supplied by the DHCP Server. Default or manually entered addresses will be
dimmed out and bypassed. If Use DHCP? is set to No, you should manually
enter the LAN IP, Netmask and Gateway settings.
LAN Gateway
This is the gateway IP address for the local network, typically the IP address of a
router.
router.
LAN Netmask
This is the subnet mask IP address used to determine to which TCP/IP subnet
the reader belongs. Devices in the same subnet can be communicated with
locally without going through a router.
the reader belongs. Devices in the same subnet can be communicated with
locally without going through a router.