Lear Corporation GTE05A ユーザーズマニュアル
Lear UGDO
Lear UGDO Owner’s Guide Version 3.2 Page 2
3/27/2006
Programming the Lear UGDO™ Transmitter
Depending on your garage door opener manufacturer, Lear UGDO™ provides two easy ways to
program your garage door opener.
program your garage door opener.
1. Rolling Code Garage Door Openers: If your garage door opener is a rolling code device
and do not have a row of dip switches use the “Programming Rolling Code Garage Door
Opener” procedure on page 4.
Opener” procedure on page 4.
2. Fixed Code Garage Door Opener: If your garage door opener is a fixed code device and
has a row of dip switches use the “Programming Fixed Code Garage Door Opener”
procedure on page 6.
procedure on page 6.
CAUTION
x
Do not use the Lear UGDO™ Transmitter with any garage door opener
that does not have a “stop and reverse” feature. This includes any garage
door opener model manufactured before April 1, 1982.
that does not have a “stop and reverse” feature. This includes any garage
door opener model manufactured before April 1, 1982.
x
Read the instructions completely before attempting to program the LEAR
UGDO™ transmitter. Because of the steps involved, it may be helpful to
have another person assist you in programming the transmitter.
UGDO™ transmitter. Because of the steps involved, it may be helpful to
have another person assist you in programming the transmitter.
x
Be sure to keep the original remote control transmitter for use in other
vehicles as well as for future Lear UGDO™ programming. You only
need it for fixed code device programming. It is also recommended that
upon the sale or lease termination of the vehicle, the programmed Lear
UGDO™ buttons should be erased for security reasons. Refer to “Erasing
Lear UGDO™ Buttons” or for assistance, contact Lear UGDO™ at 1-
866-57Car2U.
vehicles as well as for future Lear UGDO™ programming. You only
need it for fixed code device programming. It is also recommended that
upon the sale or lease termination of the vehicle, the programmed Lear
UGDO™ buttons should be erased for security reasons. Refer to “Erasing
Lear UGDO™ Buttons” or for assistance, contact Lear UGDO™ at 1-
866-57Car2U.
x
Make sure that people and objects are clear of the garage door opener or
security device you are programming. When programming a garage door,
it is advised to park outside the garage.
security device you are programming. When programming a garage door,
it is advised to park outside the garage.
PROGRAMING CONSIDERATIONS:
Read the instructions completely before attempting to program Car2U.
The following items may assist you in programming the system:
o A ladder
o A screwdriver
o A writing pad and a pencil or pen
It may be helpful but is not required to have an additional person available when
programming Car2U.
programming Car2U.
Retain the original transmitter for use in other vehicles as well as for future programming
procedures (i.e. new Car2U-equipped vehicle purchase).
procedures (i.e. new Car2U-equipped vehicle purchase).
Upon the sale of the vehicle, it is recommended that the programmed Car2U buttons
should be erased for security reasons (refer to “Erase Car2U Settings”).
should be erased for security reasons (refer to “Erase Car2U Settings”).
Repeat the programming steps for each garage door opener you wish to program up to a
maximum of three.
maximum of three.
Short Term Confidentiality Requested