Lear Corporation GTE05A ユーザーズマニュアル

Lear UGDO 

Lear UGDO Owner’s Guide Version 3.2  Page 4 

3/27/2006 

1. Firmly PRESS the outer two Lear UGDO™ buttons for    one — two seconds and 

immediately release them. 

2. Go to the garage. Locate the garage door motor head and Press and Release its “learn” 

button. You may need a ladder to reach the unit and you may need to remove the unit’s 
cover to locate the “learn” button. After pressing the “learn” Button you have 10 to 30 
seconds to complete Step 3 depending on your garage control unit  If you cannot locate 
the “learn” button, refer to the Owner’s Guide of your garage door opener or call 1-866-
57Car2U.

3. Return to your vehicle, Press and HOLD the Car2U Button you would like to use to 

control the garage door. Immediately 

(within 1 second)

 release the button once the garage 

door begins to move. You may need to hold the button from 5 to 20 seconds during 
which time the selected button indicator light will blink slowly.  

“Learn” Button shown 
on typical Rolling Code 
Garage Door Opener 

Short Term Confidentiality Requested