JSW Pacific Corporation CCD-602S ユーザーズマニュアル

Connect the DC plug of the power unit to the voltage supply jack of the camera. Pay 

attention to the correct input voltage of 7.5V DC! 

-  Insert the plug-in power unit into a suitable mains socket. 

-  The camera is now ready for use. 

Installing the Receiver   

Set up the receiver approx. 1 m above ground (better receiving conditions). There 

must be a power outlet proximity to the receiving site. 

  A TTENTION! Only place the receiver on rugged and stable surfaces. 

 

1. Receiver antenna 

2. Power plug 

3. A/V Output 

4. LED (RED for Channel1,2,3,4, BLUE for USB connection) 

5. Channel selection switch 

6. USB connector 

7. Power supply 

8. A/V cable 

 

 

●  Connect the A/V cable as depicted to a suitable monitor or TV system with an A/V 

cinch input and the receiver (white plug = audio (tone in mono), yellow plug = video).   
●  Connect the power supply