Справочник Пользователя для JSW Pacific Corporation CCD-602S
Connecting the camera
Connect the DC plug of the power unit to the voltage supply jack of the camera. Pay
attention to the correct input voltage of 7.5V DC!
- Insert the plug-in power unit into a suitable mains socket.
- The camera is now ready for use.
Installing the Receiver
Set up the receiver approx. 1 m above ground (better receiving conditions). There
must be a power outlet proximity to the receiving site.
A TTENTION! Only place the receiver on rugged and stable surfaces.
1. Receiver antenna
2. Power plug
3. A/V Output
4. LED (RED for Channel1,2,3,4, BLUE for USB connection)
5. Channel selection switch
6. USB connector
7. Power supply
8. A/V cable
Connecting the receiver to monitor
● Connect the A/V cable as depicted to a suitable monitor or TV system with an A/V
cinch input and the receiver (white plug = audio (tone in mono), yellow plug = video).
● Connect the power supply
● Connect the power supply