Alvarion Technologies Ltd. BMAX-BA36 ユーザーズマニュアル

 

128

Operation

Chapter 4 - Operation and Administration

The default passwords are:

Select this option to reset the NPU. To avoid unintentional reset, you will be 
prompted to confirm the reset request. Changes to some of the configurable 
parameters are applied only after reset.

Refer to 

 for information on which parameters are changeable in run 

time and which changes are applied only after reset.

Select this option to set the Base Station and NPU parameters (excluding the 
access Passwords) to their factory default values. The parameters will revert to 
their default values after the next reset.

Refer to 

 for information on the factory default values of these 

parameters.

The NPU can contain two SW versions:

„

Main: Each time the NPU resets it will reboot using the version defined as 
Main.

„

Shadow: Normally the Shadow version is the backup version. Each time a new 
SW File is downloaded to the NPU, it will be stored as a Shadow version, 
replacing the previous Shadow Version.

The typical process of upgrading to a new SW version includes the following steps:

Administrator

admin

Installer

installer

Monitor

monitor

Setting the parameters of the NPU to their default values will disable remote management of the 
Base Station since this affects the IP and Ethernet parameters and will delete all Authorized 
Managers.