Turbocomm Tech Inc. IA300 ユーザーズマニュアル
Model : IA-300
Installation Guide
Page 2
POINT TO POINT SERVI CE FOR WINDOWS 95A
1.
After installing the IA-300 card, power on the PC system. The Hardware Wizard will
detect the card as a PCI Network Controller. Select the Driver from disk provided by
hardware manufacturer option. Click OK.
detect the card as a PCI Network Controller. Select the Driver from disk provided by
hardware manufacturer option. Click OK.
2.
Insert the IA-300 Driver CD into the CD-ROM drive.
3.
The Install From Disk window appears. Enter the <CD drive letter>:\Drivers\
Win95_98\ PPPoA (e.g. D:\Drivers\Win95_98\PPPoA), then click OK.
Win95_98\ PPPoA (e.g. D:\Drivers\Win95_98\PPPoA), then click OK.
4.
When the Service Option window appears, click Next for the default installation
(VPI=0, VCI=35, Framing=VC MUX). For Advanced settings, please consult your
ADSL service provider for detailed information.
(VPI=0, VCI=35, Framing=VC MUX). For Advanced settings, please consult your
ADSL service provider for detailed information.
NOTE: If you clicked Advanced, the Service Options window shows the Connection
Address. Enter the service Connection Address, click OK. The previous Service
Option window will appear, click Next.
Address. Enter the service Connection Address, click OK. The previous Service
Option window will appear, click Next.
NOTE: During the installation process you may be asked to insert your Windows 95
CD. Insert the Windows 95 CD into the CD drive and click OK.
CD. Insert the Windows 95 CD into the CD drive and click OK.
NOTE: If during the file copying process a file is reported as “not found” enter the path
<CD Drive letter> :\Win95 (e.g. D:\Win95)
<CD Drive letter> :\Win95 (e.g. D:\Win95)
5.
At the conclusion of the IA-300 driver installation, the Diagnostic Tools icon is active
and monitoring connectivity. The Diagnostic Tools – found on the task bar – with
blinking (or solid) Black or Green lights indicates a good connection. Diagnostic
Tools with Red lights indicate a connection error or driver load error. Verify that the
cable is properly connected to the data port of the service and the IA-300 card.
and monitoring connectivity. The Diagnostic Tools – found on the task bar – with
blinking (or solid) Black or Green lights indicates a good connection. Diagnostic
Tools with Red lights indicate a connection error or driver load error. Verify that the
cable is properly connected to the data port of the service and the IA-300 card.
6.
You must now make a network connection, go to page 8.