Turbocomm Tech Inc. IA300 ユーザーズマニュアル
Model : IA-300
Installation Guide
Page 4
POINT TO POINT SERVI CE FOR WINDOWS 98, 98A
1.
After installing the IA-300 card and restarting the system, the Add New Hardware
Wizard window will automatically appear and indicate that a new PCI Network
Controller has been found. Click Next.
Wizard window will automatically appear and indicate that a new PCI Network
Controller has been found. Click Next.
2.
Then select Search for the best driver for your device.
(Recommended), click Next.
(Recommended), click Next.
3.
Insert the CD labeled IA-300 Driver into your CD drive.
4.
Then select Specify a location and enter <CD drive letter>:\Drivers\Win98SE\PPPoA
(e.g. D:\Drivers\Win98SE\PPPoA) and click OK. Click Next.
(e.g. D:\Drivers\Win98SE\PPPoA) and click OK. Click Next.
5.
The Add New Hardware Wizard will find the ITeX ADSL PCI NIC. Click Next.
6.
When the Service Option window appears, click Next for the default installation
(VPI=0, VCI=35, Framing=VC MUX). For Advanced settings, please consult your ADSL
service provider for detailed information.
(VPI=0, VCI=35, Framing=VC MUX). For Advanced settings, please consult your ADSL
service provider for detailed information.
NOTE: If you clicked Advanced, the Service Options window shows the Connection
Address. Enter the service Connection Address, click OK. The previous Service
Option window will appear, click Next.
Address. Enter the service Connection Address, click OK. The previous Service
Option window will appear, click Next.
NOTE: Additional files are copied from the IA-300 CD to the hard drive. In addition, files
are now copied from the Windows CD (system CAB files) to the hard drive.
are now copied from the Windows CD (system CAB files) to the hard drive.
7.
If prompted to insert the CD do so at this time then click OK. Enter the <CD drive
Letter>: \Win98 (e.g. D:\Win98) and click OK.
Letter>: \Win98 (e.g. D:\Win98) and click OK.
8.
At the conclusion of the IA-300 driver installation, the Add New Hardware window
appears. Click Finish.
appears. Click Finish.
9.
For the PC system to properly set up the IA-300, a system Restart is required. Cl ick
Yes.
Yes.
NOTE: After restarting the system, the Diagnostic Tools icon is active and monitoring
connectivity. The Diagnostic Tools – found on the task bar – with blinking (or solid)
Black or Green lights indicate a good connection. Diagnostic Tools with Red lights
indicate a connection error or driver load error. To use Diagnostic Tools, right click the
icon and then select Diagnostic. Click Run Diagnostic.
connectivity. The Diagnostic Tools – found on the task bar – with blinking (or solid)
Black or Green lights indicate a good connection. Diagnostic Tools with Red lights
indicate a connection error or driver load error. To use Diagnostic Tools, right click the
icon and then select Diagnostic. Click Run Diagnostic.
10. You must now make a dial-up network connection. At the task bar, click on the Start
icon, and then select Programs, Accessories, Communications, followed by Dial-Up
Networking.
Networking.
11. The Make New Connection window appears. Double-click the Make New
Connection icon. Enter a connection name (e.g. My Connection ). At the select a
device option, use the scroll down menu to locate ITeX ADSL PCI NIC, then click
Next.
device option, use the scroll down menu to locate ITeX ADSL PCI NIC, then click
Next.
12. Enter the Host Name or IP Address if provided by your ISP, otherwise enter (0) zero,
and then click Next.
13. Make New Connection is complete. Click Finish.
14. The new connection will appear in the Dial-Up Networking window.
15. Double-click the My Connection icon to begin a Dial-Up session.