Cameo Communications Inc DSLR2001N ユーザーズマニュアル
Setup
TRENDnet
DSLR-2001N
35
Bridge Mode
If you select Bridge mode (RFC-1483 Bridged), the screen below is
displayed.
displayed.
State of Connection — Select whether to enable or disable this
connection.
connection.
Name — Enter your desired connection name.
CIP (RFC-1577)
If you select CIP (RFC-1577 Classic RP/ARP over ATM), the screen
below is displayed.
below is displayed.
State of Connection — Select whether to enable or disable this
connection.
connection.
Name — Enter your desired connection name.
NAT — Select whether to enable or disable NAT (Network Address
Translation). Enable this setting to share one WAN IP address with
multiple computers on your network.
Translation). Enable this setting to share one WAN IP address with
multiple computers on your network.
External IP Address — Enter the IP address provided by your ISP.
Subnet Mask — Enter the subnet mask provided by your ISP.
Default Gateway — Enter the default gateway provided by your ISP.
DNS Enabled — Select whether to enable or disable DNS (Domain Name
System).
System).
DNS Override Allowed — Select whether to enable or disable DNS
override.
override.
DNS Server 1 and DNS Server 2 — If provided by your ISP, enter the
DNS server. Otherwise, leave these fields blank.
DNS server. Otherwise, leave these fields blank.