Adtran TRC6410L2X ユーザーズマニュアル
TRACER 6000 Series Integrated System Manual
Section 5 User Interface Guide
612806420L1-1D
Copyright © 2005 ADTRAN, Inc.
57
1.
NAVIGATING THE TERMINAL MENU
The TRACER 64x0 menu system can be accessed with a VT100 compatible terminal that is connected to
the
the
CRAFT PORT
(located on the front of the unit) and set to 9600 bits per second (default), 8 data bits,
1 stop bit, and no parity. Flow control on the serial interface should be configured to
N
ONE
for proper
operation. Once a terminal is connected, press <Enter> until the login screen appears. The default
password for the TRACER 64x0 is password.
password for the TRACER 64x0 is password.
Terminal Menu Window
The TRACER 64x0 uses a series of menu pages and a single Main menu page to access its many features.
The Main menu page (see Figure 1) provides a link to all available configuration/status pages.
The Main menu page (see Figure 1) provides a link to all available configuration/status pages.
Figure 1. Main Menu Screen
All TRACER 64x0 passwords are case-sensitive.
After connecting a VT100 terminal to the TRACER 64x0, press <Ctrl + l> or <Ctrl + r> to
redraw the current screen.
redraw the current screen.