Adtran TRC6410L2X ユーザーズマニュアル
TRACER 6000 Series Integrated System Manual
Section 5 User Interface Guide
612806420L1-1D
Copyright © 2005 ADTRAN, Inc.
61
I. Rx Power
Displays the approximate receiver levels (for both the local and remote units) using a series of symbols
(
(
#
) and the actual real-time value (in dBm). The more symbols (
#
) displayed, the stronger the signal. If
the link is down in either direction and remote end data is unavailable,
D
ATA
N
OT
A
VAILABLE
is
displayed in place of the symbols (
#
).
J. Tx Power
Displays both an approximate transmitter levels (for both the local and remote units) using a series of
symbols (
symbols (
#
) and the actual real-time value (in dBm). The more symbols (
#
) displayed, the stronger the
signal. If the link is down in either direction and remote end data is unavailable,
D
ATA
N
OT
A
VAILABLE
is displayed in place of the symbols (
#
).
K. Navigation Reminders
Displays system navigation reminders. For more details on system navigation, refer to Navigating the
Terminal Menu on page 57.
Terminal Menu on page 57.
L. Real-Time Signal Values
Displays real-time signal values for Rx Quality, Rx Power, and Tx Power (for both the local and
remote units).
remote units).
> M
AIN
M
ENU
The TRACER 64x0 Main menu page provides access to all other configuration/status pages. Figure 3 on
page 62 shows the TRACER 64x0 Main menu page.
page 62 shows the TRACER 64x0 Main menu page.
Real-time signal values are not supported on all TRACER 64x0 systems. Systems must be
ADTRAN calibrated to provide readings for Rx or Tx Power signal levels.
ADTRAN calibrated to provide readings for Rx or Tx Power signal levels.
Installed network modules are displayed as menu options 5 (slot 1) and 6 (slot 2). Menu
options for empty slots are not displayed.
options for empty slots are not displayed.