Unitech Electronics Co. Ltd. MS840BC ユーザーズマニュアル
5
Chapter 2
Battery Charging and Connection
Battery Charging via Cradle
The battery is in advance loaded into the compartment of the scanner and may not
be fully charged before shipment. When you receive the package and use the
MS840 for the first time, you will need to fully charge the battery.
Note: It takes approximately 4.5 hours to fully charge the battery.
be fully charged before shipment. When you receive the package and use the
MS840 for the first time, you will need to fully charge the battery.
Note: It takes approximately 4.5 hours to fully charge the battery.
To charge the scanner with a cradle, follow the instructions below:
1. Plug the AC adapter cable into the power
1. Plug the AC adapter cable into the power
socket on the bottom of cradle.
2. Plug the AC adapter cord into an electrical
outlet.
Now, check whether the power LED on
the cradle is bright in solid green and the
communication status LED on the cradle
is bright in solid blue.
the cradle is bright in solid green and the
communication status LED on the cradle
is bright in solid blue.
3. Place the scanner in the cradle. The
scanner LED will be red to indicate
charging. When the scanner is charged,
the LED will turn off.
charging. When the scanner is charged,
the LED will turn off.